Class I Biological Safety Cabinet Scientific Laboratory Euqipment
Class I Bio-safety Cabinet does not protect the product from
contamination because non clean room air constantly enters into
work area.As a particular containment unit, the Class I Bio-safety
Cabinet is suitable for work involving low to moderate risk agents
(Bio-safety Levels 1, 2 and 3) where there is a need for
containment, but not for product protection.Unlike conventional
fume hood, the HEPA filter in the Class I Bio-safety Cabinet
protects the environment by filtering air before it is
exhausted.With the negative pressure, personnel protection is made
possible by constant movement of air into the work area.
1. Soft touch control panel, LCD display.
2. UV lamp for sterilization.
3. Stable air flow system; protecting to person and environment.
4. Energy-saving, high efficiency, low noise.
5. One piece 304 stainless steel work stable, easy for cleaning.
|HEPA Filter||99.999% efficiency at 0.3 μm|
|Noise||NSF 49≤61 dB/EN 12469≤58 dB|
|Emission of 253.7 nanometers for most efficient decontamination|
|Work surface Height||740mm|
|Main Body Construction||Cold-rolled steel with anti-bacteria powder coating|
|Work Table||304 stainless steel|
|Standard Accessory||Fluorescent lamp, UV lamp*2, base stand|
Air Pattern of Class I Biosafety Cabinet: